1. Remove the side cover to reveal the variator, belt and clutch.
2. Remove the variator nut whilst locking the variator with a universal variator/clutch/flywheel holding tool.
3. Remove the variator assembly from the shaft.
4. Remove the plate shown below from the variator assembly.
This restricts the movement of the roller weights and hence limits top speed.
The assembly is shown with the cover removed to show the roller weights in position.
5. Replace the variator assembly, belt etc.
6. Lock the variator and torque the variator nut to 40nM (other models may vary so check first).
7. Replace the side cover.